Edit in GitHubLog an issue

Add a custom shipping address renderer

This topic describes how to implement a custom shipping address renderer.

Out of the box, checkout consists of two steps:

  • Shipping Information
  • Review and Payment Information

On the Shipping Information checkout step, the application renders all addresses previously saved by a shopper. The shopper can then select the one to be used for shipping by clicking it. The default address renderers cover the majority of use cases, but the application provides a way to register custom address renderer for a new address type.

To implement shipping address rendering in checkout, you need to take the following steps:

  1. Create the JS renderer component (shipping address renderer).
  2. Create a template for the shipping address renderer.
  3. Create the JS model for the shipping rate processor.
  4. Create the JS model for the shipping address saving processor.
  5. Create the JS component registering the processors.
  6. Declare the new components in the checkout page layout..
  7. Add the shipping address renderer to the "Ship-To" block (optional).

Step 1: Create the JS renderer component (shipping address renderer)

Your shipping address renderer must be implemented as a JavaScript UI component. That is, it must be a RequireJS module, and must return a factory function, that takes a configurable object.

For the sake of compatibility, upgradability and easy maintenance, do not edit the default application code. Instead add your customizations in a separate module. For your checkout customization to be applied correctly, your custom module must depend on the Magento_Checkout module. Module dependencies are specified in the module's composer.json. Do not use Ui for your custom module name, because %Vendor%_Ui notation, required when specifying paths, might cause issues.

In your custom module directory, create the component's .js file (shipping address renderer). It must be located under the <your_module_dir>/view/frontend/web/js/view/ directory.

The following is a general view of the shipping address renderer:

Copied to your clipboard
define([
'ko',
'uiComponent',
'Magento_Checkout/js/action/select-shipping-address',
'Magento_Checkout/js/model/quote'
], function(ko, Component, selectShippingAddressAction, quote) {
'use strict';
return Component.extend({
defaults: {
template: '%path to your template%'
},
initProperties: function () {
this._super();
this.isSelected = ko.computed(function() {
var isSelected = false;
var shippingAddress = quote.shippingAddress();
if (shippingAddress) {
isSelected = shippingAddress.getKey() == this.address().getKey();
}
return isSelected;
}, this);
return this;
},
/** Set selected customer shipping address */
selectAddress: function() {
selectShippingAddressAction(this.address());
},
/** additional logic required for this renderer **/
});
});

Step 2: Create a template for the shipping address renderer

In your custom module directory, create a new <your_module_dir>/view/frontend/web/template/<your_template>.html file. The template can use Knockout JS syntax.

The template should contain a button for setting the address to be used for shipping.

You can use the code from the default template: app/code/Magento/Checkout/view/frontend/web/template/shipping-address/address-renderer/default.html.

Step 3: Create the JS model for the shipping rate processor

A shipping rate processor is responsible for retrieving the shipping rates available for the given shipping address.

In your custom module directory, create the component's .js file for the processor. It must be located under the <your_module_dir>/view/frontend/web/js/model/ directory.

Here you need to specify the URL used for calculating the shipping rates for your custom address type.

The following is a sample of the shipping rate processor code:

Copied to your clipboard
define(
[
'Magento_Checkout/js/model/quote',
'Magento_Checkout/js/model/shipping-service',
'Magento_Checkout/js/model/shipping-rate-registry',
'magento/storage',
'Magento_Checkout/js/model/error-processor',
// additional dependencies
],
function (quote, shippingService, rateRegistry, storage, errorProcessor, ...) {
'use strict';
return {
getRates: function(address) {
var cache = rateRegistry.get(address.getKey());
if (cache) {
shippingService.setShippingRates(cache);
} else {
shippingService.isLoading(true);
storage.post(
%URL for shipping rate estimation%,
JSON.stringify({
%address parameters%
}),
false
).done(
function (result) {
rateRegistry.set(address.getKey(), result);
shippingService.setShippingRates(result);
}
).fail(
function (response) {
shippingService.setShippingRates([]);
errorProcessor.process(response);
}
).always(
function () {
shippingService.isLoading(false);
}
);
}
}
};
}
);

Step 4: Create the JS model for the shipping address saving processor

This processor is responsible for sending the shipping address and the selected rate to the server.

In your custom module directory, create the component's .js file for the processor. It must be located under the <your_module_dir>/view/frontend/web/js/model/ directory.

The following is a sample of the shipping rate processor code:

Copied to your clipboard
define(
[
'Magento_Checkout/js/model/quote',
'Magento_Checkout/js/model/resource-url-manager',
'mage/storage',
'Magento_Checkout/js/model/payment-service',
'Magento_Checkout/js/model/error-processor',
'Magento_Checkout/js/model/payment/method-converter'
],
function (quote, resourceUrlManager, storage, paymentService, errorProcessor, methodConverter) {
'use strict';
return {
saveShippingInformation: function() {
var shippingAddress = {},
payload;
shippingAddress.extension_attributes = {
%address extension attributes%
};
payload = {
addressInformation: {
shipping_address: shippingAddress,
shipping_method_code: quote.shippingMethod().method_code,
shipping_carrier_code: quote.shippingMethod().carrier_code
}
};
return storage.post(
resourceUrlManager.getUrlForSetShippingInformation(quote),
JSON.stringify(payload)
).done(
function (response) {
paymentService.setPaymentMethods(methodConverter(response.payment_methods));
quote.setTotals(response.totals)
}
).fail(
function (response) {
errorProcessor.process(response);
}
);
}
}
}
);

Step 5: Create the JS component registering the processors

In your custom module directory, create the .js UI component that registers the rate processor and the saving processor. It must be located under the <your_module_dir>/view/frontend/web/js/view/ directory.

The file content must be similar to the following:

Copied to your clipboard
define(
[
'uiComponent',
'Magento_Checkout/js/model/shipping-rate-service',
%custom shipping rate processor%,
'Magento_Checkout/js/model/shipping-save-processor',
%custom shipping save processor%
],
function (
Component,
shippingRateService,
customShippingRateProcessor,
shippingSaveProcessor,
customShippingSaveProcessor
) {
'use strict';
/** Register rate processor */
shippingRateService.registerProcessor(%address type%, customShippingRateProcessor);
/** Register save shipping address processor */
shippingSaveProcessor.registerProcessor(%address type%, custormShippingSaveProcessor);
/** Add view logic here if needed */
return Component.extend({});
}
);

Step 6: Declare the new components in the checkout page layout

In your custom module directory, create a new <your_module_dir>/view/frontend/layout/checkout_index_index.xml file. In this file, add the following:

Copied to your clipboard
<page xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="urn:magento:framework:View/Layout/etc/page_configuration.xsd">
<body>
<referenceBlock name="checkout.root">
<arguments>
<argument name="jsLayout" xsi:type="array">
<item name="components" xsi:type="array">
<item name="checkout" xsi:type="array">
<item name="children" xsi:type="array">
<item name="steps" xsi:type="array">
<item name="children" xsi:type="array">
<item name="shipping-step" xsi:type="array">
<item name="children" xsi:type="array">
<!-- Declare the component that registers the shipping address and rates processors -->
<item name="custom-address-provider" xsi:type="array">
<item name="component" xsi:type="string">%component that registers address/rate processors%</item>
</item>
<!-- Declare the component that renders the shipping address -->
<item name="shippingAddress" xsi:type="array">
<item name="children" xsi:type="array">
<item name="rendererTemplates" xsi:type="array">
<item name="%address type%" xsi:type="array">
<item name="component" xsi:type="string">%address renderer JS component%</item>
</item>
</item>
</item>
</item>
</item>
</item>
</item>
</item>
</item>
</item>
</item>
</argument>
</arguments>
</referenceBlock>
</body>
</page>

The address_type you need to specify in the layout, is the value you set in the JS model of your custom address type.

Step 7: Add the shipping address renderer to the "Ship-To" block (optional)

On the Review and Payment Information step of checkout, the shipping address is displayed in the Ship-To section for customer to make sure everything is set correctly.

If you want your custom address type to be displayed here as well, you need to create an .html template for rendering it, and declare in the corresponding location in layout.

Add template for displaying the address in the Ship-To section

In your custom module directory create a new <your_module_dir>/view/frontend/web/template/<your_template>.html file. The template can use Knockout JS syntax.

You can use the code from the default template: app/code/Magento/Checkout/view/frontend/web/template/shipping-information/address-renderer/default.html.

Declare the address to be used in the Ship-To section in layout

In your <your_module_dir>/view/frontend/layout/checkout_index_index.xml file, add the following:

Copied to your clipboard
<page xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="urn:magento:framework:View/Layout/etc/page_configuration.xsd">
<body>
<referenceContainer name="content">
<block class="Magento\Checkout\Block\Onepage" name="checkout.root" template="onepage.phtml" cacheable="false">
<arguments>
<argument name="jsLayout" xsi:type="array">
<item name="components" xsi:type="array">
<item name="sidebar" xsi:type="array">
<item name="children" xsi:type="array">
<item name="shipping-information" xsi:type="array">
<item name="children" xsi:type="array">
<item name="ship-to" xsi:type="array">
<item name="rendererTemplates" xsi:type="array">
<item name="%address type%" xsi:type="array">
<item name="component" xsi:type="string">uiComponent</item>
<item name="config" xsi:type="array">
<item name="template" xsi:type="string">%custom template%</item>
</item>
</item>
</item>
</item>
</item>
</item>
</item>
</item>
</item>
</argument>
</arguments>
</block>
</referenceContainer>
</body>
</page>

Step 8: Deploy the static content and clean the cache

  1. Deploy static content:

    Copied to your clipboard
    bin/magento setup:static-content:deploy
  2. Then clean the cache:

    Copied to your clipboard
    bin/magento cache:clean
  • Privacy
  • Terms of Use
  • Do not sell or share my personal information
  • AdChoices
Copyright © 2024 Adobe. All rights reserved.